Have you spotted a Yellow or Amber beacon on your travels recently…?

Have you spotted a Yellow or Amber beacon on your travels recently…?



The colour Yellow or Amber naturally triggers a person’s thoughts to slow down and to be cautious. For this reason, yellow/amber coloured beacons are used on slow moving vehicles, on construction sites, airports and in other establishments to increase awareness to crowds. This colour encourages caution in places where unexpected hazards exist. When extra due care and caution is required, amber lights will be used in conjunction with red lights.

Looking at yellow and amber coloured beacons on the roads, as this is the most common area you will see them in your day to day life, these are used on:


-Road works
Used to alert that there may be disruption, slow moving traffic and hazards ahead in the road.


-Large/slow moving vehicles
You will see these beacons on bin lorries, recovery trucks and large load trucks.


-Zebra crossings

Where a pedestrian may cross the road at any given time, so caution is required at all times when approaching.


-Bridges & train crossing lines
Often used here in conjunction with red lights to give the extra caution needed.

On roads, yellow and amber lights should only be used to warn drivers and pedestrians alike of unexpected or unusual conditions, they must be used appropriately to be used to their full effect.

See our product range here: https://beaconlamps.com/products/
☎ 01283 550850 📧 mail@beaconlamps.com

The Importance of Yellow & Amber Beacons

Yellow or amber beacons are extremely important as they encourage caution in places where unexpected hazards exist.  Once you see these colours your immediate reaction is to slow down and take caution into the area you are approaching as an unexcepted situation is waiting ahead. Most commonly these are found on large, stationary or slow moving vehicles but are also found in other areas such as airports and in conjunction with a red warning symbol to warn of extra caution.

Looking at yellow and amber beacons on roads as this is the most common area they are used, as already mentioned; these are most commonly used on large and slow moving vehicles, but are also used in many other places, such as:

  •  Zebra crossings: where a pedestrian may cross the road at any given time, so caution is required at all times when approaching.
  • Road works: used to alert that there may be disruption and hazards ahead in the road.
  • On bridges and train crossing lines: often used here in conjunction with red lights to give the extra caution needed.
  • Examples of large/slow vehicle’s you may find these units on are bin lorries, recovery trucks and large load trucks.

On roads, yellow and amber lights should only be used to warn drivers of unexpected or unusual conditions, they must be used appropriately to be used to their full effect on users.

The Importance of Amber & Yellow Beacon Lights

The Importance of Amber & Yellow Beacon Lights

Yellow or amber beacon lights can be seen in numerous places, covering a wide range of different applications. They are also frequently found in roads and airport runways, among other places.

Flashing Amber Lights For Road Safety

Yellow or amber beacon lights are most commonly found on stationary or slow-moving vehicles. These devices are typically installed as magnetic mount beacons to trucks and construction vehicles to enhance visibility during day and night.

Additionally, flashing yellow or amber beacon lights send a message to other vehicles on the roadway to slow down. While they can initially draw attention to a given situation, their effect may lose over time.

Flashing yellow lights are installed in particular roadways where people need greater care than normal. These lights can be installed immediately at a junction, or around round works, as an additional warning device to road signs. But take note that flashing yellow lights should only be employed to warn drivers of unexpected or unusual conditions such as incidents occurring 0n high-speed roadways, special roadway conditions, obstructions in the roadway, narrow bridges, and so much more.

The Different Types Of Yellow or Amber Flashing Beacons

– Intersection control beacon – An intersection control beacon is a yellow flashing beacon that is most commonly utilized at intersections controlling 2 or more travel directions. It is primarily meant for intersections where physical conditions and traffic do not require conventional traffic signals but needs an additional safety measure.

– Warning beacon – Warning beacons or hazard identification beacons are a warning beacon that can only be used to add a regulatory or warning sign. A  yellow warning beacon is implemented at crosswalks to provide a warning that there is an obstruction in a roadway or in a roadway next to it. This works to supplement advanced warning signs at intersections or junctions wherein additional warning is needed.

– Speed limit sign beacon – Another type of flashing yellow beacon that helps with road safety is the speed limit sign beacon. This beacon can be utilized in places where speed limits are imposed.

– Stop sign beacon – This type of yellow flashing beacon is used when further attention is needed to warn drivers that a hazard is existing ahead. A stop sign beacon is used along with a stop sign. Compared to a stop sign, the combination of stop sign and stop sign beacon is a very effective solution in areas that are located just beyond a road curve that is not visible from the view of the vehicle.

Conclusion

To summarise, yellow or amber beacon lights are indeed essential. These devices can provide an added caution in places where unexpected hazards exist. They catch extra attention to drivers as well as pilots on roadways and runways alike. While they are utilized for different purposes, yellow or amber beacon lights primarily helps to increase the visibility of a road sign and send a warning that an unexpected situation is waiting ahead. Encourage caution with yellow or amber beacon lights.