*NEW!*  PSC/HP-LED IP69K BEACON

*NEW!* PSC/HP-LED IP69K BEACON

High Powered LED Beacon tested to IP69K Ingress Protection

84mm High x 94mm Diameter

The newest addition to the deegee range is the PSC-HP-LED Beacon, which is a High Brightness LED product, with an Ingress Protection of IP69K.

– The PSC/HP-LED employs high-performance LEDs yielding both exceptional brightness levels and a wider, more evenly distributed angle of view and a new single-part lens tested to IP69K Ingress Protection.

– Extensively configurable, comprising a robust White (standard) or Red (option) ABS Base, and a Polycarbonate lens. Multiple units can be joined together, including the matching IAS-C Sounder, to provide an integrated signalling system. (Note that system IP rating will be limited that of the lowest component IP rating)

– Circuitry is fixed to the lens assembly, with convenient access to the 2.5mm² terminal block for wiring, allowing easy fitting of bases and wiring during installation, and safe storage of the electronics and lenses for phase 2 fitting.

– Available with Red, Amber, Green, Blue or White LEDs.

Call or email our Sales Team for more information – Email: mail@beaconlamps.com Tel: 01283 550850

IP Ratings

IP Rating (Ingress Protection)

The IP rating system (or Ingress Protection rating) is a scale of how waterproof and airtight an item is.

Words like ‘waterproof’ can be fairly vague so using the IP system gives a clear and concise guide to ensure that an item is suitable for the environment it will be installed in.

Each IP rating is made up of two numbers:
The first being its protection from solid objects, ranging from body parts to dust. For example if you were to install an electrical product in a dusty environment like a beach or desert you would need the first number to be at least 5 or 6 to protect the products electrical circuits from being damaged by dust ingress.
The second being its protection from water, ranging from dripping water to complete submersion. For example if you were installing an electrical product in a marine area where is might end up in under water, you would need the second number to be at least 7 or 8.

The table below shows this in more detail:

Without the IP rating system you could order something ‘waterproof’ that might be protected from heavy rain but would fill with water if submerged, this is why the IP rating system is so widely used and extremely helpful to save time and money.

DG Controls offer a wide range of IP65 rated beacons and sounders, we also offer an IP66 and IP68 range too!

Click here for more information.
IP Ratings Explained

IP Ratings Explained

The IP Rating System (or Ingress Protection rating) is a scale of how waterproof and airtight an item is, as specified by the International Standard IEC/EN 60529.

IP ratings are made up of two numbers; the first being its protection from solid objects, and the second being its protection from water.

The majority of our range of products are IP65 rated, making them suitable for outdoor use.

In addition, we have some products which are rated IP66, offering even more protection against the elements:

Series B Beacons

IP66 beacon 135mm High x 94 Dia.

 

 

– Xenon Strobe

– Revolving / Pulsed/ Static LED

– Pulsed High Power LED Version

– Triple – Colour Red / Amber / Green

– ICAO Version

 

Click here for more information.

 

 

 

ISB-C Combined Beacon & Sounder

112 dB Multi-tone Sounder with Integrated LED Beacon 85mm High x 94mm Dia.

– 64 Tone combinations

– Maximum output 112dB(A)

– High intensity LED array integrated into horn

– Clear Horn with Red, Amber, Green, Blue or White LEDs

– Internal volume control

– 10-40Vdc, 115-230Vac/dc and VRD (45-65Vac/55-95Vdc) models

Click here for more information.

 

 

 

IAS-C Electronic Sounder

114dB Multi-tone Electronic Sounder 85mm High x 94mm Dia.

– 64 Tone combinations

– Maximum output 114dB(A)

– Internal volume control

– 10-30Vdc, 24Vac, 115-230Vac/dc and 45-65Vac/55-95Vdc models

– 2-wire connection with third-wire for alternate tone selection

– Compatible with full Series B and Series C ranges to provide a fully customised and integrated signalling solution

Click here for more information.

 

 

 

On top of these, we have our Series G Range, which have an IP Rating of IP68, making them extremely durable and suitable for marine use:

Series G Beacon

IP68 Beacon 220mm High x 256 Dia.

– Rotating Mirror – LED

– Xenon Strobe

– Revolving LED

– Pulsed / Static LED

– ICAO 10cd+

– ICAO 32cd+

 

Click here for more information.

 

 

 

 

For further information or advice on our products, please don’t hesitate to contact our experienced Sales Team: 01283 550850